XiNCOM Twin WAN XC-DPG502 User Manual page 31

Twin WAN Series – User Guide | v1
Host IP Settings
Host Network Identity
This section is used to identify each Host (PC)
Host List -
This will list all the Hosts that are currently established. To edit an existing entry,
select it from the list and click the Select button. The data fields will then be
updated with data for the selected entry.
Host Name -
Enter a name for the Host you wish to set. It is recommended you use the Host
Name (computer name) defined on the Host itself.
MAC Address -
Also called Physical Address or Network Adapter Address. Enter the MAC
address of this host.
Select Group -
Select the group you wish to put this host into.
Reserve in DHCP -
Select Enable to reserve a particular (LAN) IP address for a particular PC on your
LAN. This allows the PC to use DHCP (Windows calls this Obtain an IP address
automatically) while having an IP address which never changes.
Reserved IP -
If Reserve in DHCP is enabled, enter the IP address you want to reserve.
Host Network Binding
Bind WAN port/Session -
Select Enable if you wish to associate this PC with a particular PPPoE Session.
All traffic for that PC will then use the selected PPPoE port and session.
Binding Method -
•
Strict Binding - no failover
•
Loose Binding - failover only
•
Load Balancing - load balancing & failover
Select WAN Port/Select PPPoE session -
If the setting above is enabled select the desired Port and Session.
Note: Multiple PPPoE sessions are defined in the Advanced PPPoE screen.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
30