XiNCOM Twin WAN XC-DPG502 User Manual page 12

Twin WAN Series – User Guide | v1
7. Enter admin for the User Name and leave the Password blank.
No Response?
If your computer is using a fixed IP address, you must configure your PC to use an IP
address within the range 192.168.1.2 to 192.168.1.254, with a Network Mask of
255.255.255.0. See Appendix B – Windows TCP/IP Setup for details.
Be sure to check for the following:
•
The Twin WAN Gateway is properly installed
•
The Ethernet cable to the Twin WAN Gateway is properly attached
•
The Twin WAN Gateway is powered ON
8. After the login, you will then see the Admin Password screen, as shown in Figure 2.
Assign a password in both the Password and Verify Password fields and press the
Submit button.
9. From the setup menu, select Basic Setup and then LAN & DHCP from the submenu.
You will see a screen like the example in Figure 3.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
Figure 2.
Figure 3.
11