CARDIOSTRONG CST-TX40e-2 Assembly And Operating Instructions Manual page 18

Step 7: Alignment of the feet
If the floor is uneven, you can stabilize the treadmill by turning the two setting screws under the
main frame.
WARNING
⚠
The treadmill is equipped with high-pressure shock absorbers that can cause the treadmill
to suddenly open if handled incorrectly. For more information, refer to the general assembly
instructions.
1. Lift the treadmill on the desired side and rotate the setting screws under the main frame.
2. Rotate the screws clockwise in order to
remove them and to raise the running
surface.
3. Rotate them counterclockwise in order to
lower the running surface.
Step 8: Connecting the device to the mains supply
࣑ ATTENTION
The device must not be connected to a multiple socket, otherwise it cannot be guaranteed that
the device will be supplied with sufficient power. Technical errors can result.
Plug the power plug into a wall outlet that complies with the instructions in the chapter on electrical
safety.
18
4
2
10
TX40e