Appendix C: Updating Firmware - Cadac C Series Hardware Overview

Appendix C: Updating Firmware

The CM-DT64 operating system undergoes a programme of continuous development, as a result the
unit may be updated by loading new versions of the firmware as they become available.
This can be done via Dante's "Dante Updater". Dante Updater is a desktop application that allows you
to update the Dante firmware and software on Dante hardware devices. It is installed automatically
when you install Dante Controller, which can be downloaded from Dante's website - along with
instructions - https://www.audinate.com/products/software/dante-controller.
The application is linked to an online database containing the latest firmware update files.
9: Dante's "Dante Updater" window
When the application is connected to a Dante network, it scans the network and identifies the firmware
versions for each discovered Dante device.
If newer firmware for any device is available in the online database, you can update the device using the online
file, or download the firmware file to your local machine for offline use.
Note: The CM-DT64 has two Dante cards – both cards will need to be updated at the same time.
CM-DT64_26-05-2023_Iss-1.docx
Page. 32 / 36