Rear Panel; Shipping Details - Cadac C Series Hardware Overview

Rear Panel

The only connections that are not on the front panel are the power connections for the dual internal,
auto switching, power supplies. The connectors accept the standard and locking IEC cables.
1. PSU connectors: The dual internal PSUs have an input range of 100-240 V AC~50-60Hz, the
output requirements are +17 V, -17 V, +12 V, with a front mounted power switch.
The unit is designed to run off one PSU, however when connected the second supply provides
redundancy.
For further detailed explanation of the control surface please see section:

Shipping Details

The stage rack is shipped in a carboard box with the following additional items:
•
2 x IEC locking power cables
1
CM-DT64_26-05-2023_Iss-1.docx
Page. 12 / 36
Dante Overview: Front Panel