Front Panel Dip Switch 1; Settings For Different Sample Rates; Front Panel Dip Switch; Settings For Different Word Clock Modes - Cadac C Series Hardware Overview

Front Panel Dip Switch 1 - 2 - 3

Settings for Different Sample Rates

This function is now done via the Dante Controller software.

Front Panel Dip Switch 4 - 5

Settings for Different WORD CLOCK Modes

This function is now done via the Dante Controller software.

Important Notes

* Dante port connections are identified via MAC addresses on the Dante Controller. Each port
on all CM-DT64 units has a unique MAC address. The User must work out the MAC address of
each unit, and port, by connecting one at a time to the network, and observing what device (MAC
address) appears on the controller.
•
One Dante port Tx connection may not be routed to a Rx connection from the same port
CM-DT64_26-05-2023_Iss-1.docx
Page. 25 / 36