Setting Up The Cm-Dt64 For A Dante Network - Cadac C Series Hardware Overview

Setting up the CM-DT64 for a Dante Network

The following sections provide a guide on how to set up the Cadac CM-DT64.
TM
The following Audinate
•
'Dante Controller', provided free by Audinate
TM
Dante equipment attached to a given Dante audio network.
Follow the link for the Dante
www.audinate.com/products/software/dante-controller
•
'Dante Virtual Soundcard', which requires a separate software license, is needed to send /
TM
receive audio on a Dante network to / from a local DAW or media player.
Follow the link for the Dante
www.audinate.com/products/software/dante-virtual-soundcard
software is also required in order to use the CM-DT64 on a Dante network:
TM
Controller software:
TM
Virtual Soundcard software:
CM-DT64_26-05-2023_Iss-1.docx
Page. 23 / 36
TM
, provides remote control and set up of all