Cadac C Series Hardware Overview page 21
Dante network bridge
Hide thumbs
Also See for C Series:
- Quick start manual (12 pages) ,
- Hardware overview (129 pages) ,
- Hardware overview (63 pages)
Table of Contents
Advertisement
System below using one CM-DT64 and CM-SR stage rack using coaxial cables only
Cadac CM-J
series
NOTE: With the system setup above MegaCOMMS PORT A on the CM-DT64 and stage rack MUST be connected to the console.
The coaxial cables linking the console to the racks must be of similar length.
System below using one CM-DT64 and CM-SR stage rack with the CM-SR using fibre optic cable
Cadac CM-J
series
NOTE: With the system setup above MegaCOMMS PORT A on the CM-DT64 and stage rack MUST be connected to the console.
Cable Run ≤100m
Cable Run ≤100m
Fibre Optic Cable Run ≤ 100m
Coaxial Cable Run ≤100m
CM-DT64_26-05-2023_Iss-1.docx
Page. 21 / 36
CM-SR series stage rack
Coaxial Cable Run Linking
CM-DT64 and CM-SR ≤ 100m
CM-DT64
CM-SR series stage rack
Coaxial Cable Run Linking
CM-DT64 and CM-SR ≤ 100m
CM-DT64
Advertisement
Table of Contents
