Cadac C Series Hardware Overview page 22

Console and daisy chaining one CM-DT64 and one CM-SR stage rack
System below using one CM-DT64 and CM-SR stage rack using coaxial cables only
Cadac CM-J
series
NOTE: With the system setup above MegaCOMMS PORT A on the first stage rack MUST be connected to the console.
System below using one CM-DT64 and CM-SR stage rack with the CM-SR using fibre optic cable
Cadac CM-J
series
NOTE: With the system setup above MegaCOMMS PORT A on the first stage rack MUST be connected to the console.
NOTE: Only RG6 video cable suitable for 3G HD-SDI (High-Definition Serial Digital Interface) should be
used for the Cadac MegaCOMMS connections. The cables should be terminated in BNC connectors of
the appropriate type, and total system cable run should not exceed 100m (surface-to-stage rack or
stage rack to stage rack as a snake). A suitable cable: Kramer bulk Type BC-1X.
Coaxial Cable Run ≤100m
Cable Run ≤ 2 km
CM-DT64_26-05-2023_Iss-1.docx
Page. 22 / 36
CM-SR series stage rack
Coaxial Cable Run Linking
CM-DT64 and CM-SR ≤ 100m
CM-DT64
CM-DT64
Coaxial Cable Run Linking
CM-SR and CM-DT64 ≤ 100m
CM-SR series stage rack