Appendix B: Audinate Dante Controller Details
This program may be downloaded from the Audinate
Link:
Dante Controller Software
It is free, but you may need to register to get a copy.
Once installed, the program automatically searches out any Dante enabled devices connected to the
PC, and then allows you to configure each device.
There are three main screens that need to be considered.
Routing Screen
The example below shows the two Dante ports found on a single CM-DT64 unit.
Note how the matrix allows connections to be set up between ports.
TM
website.
CM-DT64_26-05-2023_Iss-1.docx
Page. 28 / 36