Cadac C Series Hardware Overview page 9

EU Declaration
of Conformity
(DoC)
CM-SR Series
Product Type Number
Cadac CM-DT64
Object of the declaration:
Assurance of conformance of the described product with the provisions of the stated EC Directive is given
through compliance to the following standards:
EMC Directive:
Low Voltage Directive:
The following harmonised standards and technical specifications have been applied:
Electrical Safety (LVD):
Electromagnetic Compatibility:
Note: The EMC performance of a system component will be affected by the final installation, compliance to the
stated EMC standards and conformance to the EMC Directive must be confirmed after installation by the final
equipment installer. For guidance with respect to test conditions please visit our website at
sound.com, or contact your local CADAC representative.
Signed for on behalf of:
Name of Authorised Signatory
Signature of Authorised Signatory
Position of Authorised Signatory
Date
Date when first CE marked
Place where signed
We, SCC Audio Limited, of 1 New Street, Luton, Bedfordshire, LU1 5DX declare under our
sole responsibility that the Cadac CM-DT64 Dante bridge, as detailed below complies with
the provisions of the following European Directives and is eligible to bear the CE mark:
The CM-DT64 is a 1U Dante to MegaCOMMS audio network bridge
enabling Dante units to be incorporated within a MegaCOMMS
audio network. It features A and B Dante Ethernet ports with
redundancy, operates at either 96 kHz or 48 kHz and can handle up
to 64 inputs and outputs.
2014/30/EU
2014/35/EU
EN 62368-1:2014/AC:2015
EN55032:2015
EN55013:2013+A1:2016
EN61000-3-2:2019
EN61000-3-3:2013 + A1. 2019
EN61000-4-2:2009
EN61000-6-2:2019
EN55035:2017/A11:2020
Emily Watson
Head of R&D Cadac
st
21 October 2022
st
1 March 2014
Luton, UK
CM-DT64_26-05-2023_Iss-1.docx
Page. 9 / 36
Product Description
Network Bridge
Serial number
0000000000
https://cadac-