Olimpia splendid Bi2 WALL TR 1000 Instructions For Use And Maintenance Manual page 86

d. Before re-introducing the filters, it is good practice to shake then to eliminate the
water accumulating during washing.
If the filters (7) are damaged, replace them.
e. Make sure that the filters (7) are completely dry.
f. Re-position the filters (7) correctly in the relative seats.
g. Suck possible fluff from the grille.
Do not use the appliance without the filter (7).
8.2 - MAINTENANCE
If you do not intend to use the appliance for a long period of time, work as follows:
a. Activate the fan only mode for a few hours (approximately 8÷10 hours) to dry the
interior of the appliance.
b. Stop the air appliance and disconnect the power supply.
c. Clean the air filter.
d. Remove the batteries from the remote control.
Checks before resuming use of the air conditioner:
a. Clean the filters after a long period of inactivity of the air conditioner.
b. Check that the air outlet or inlet are not obstructed (especially after a long period
of inactivity of the air conditioner).
9 - TROUBLESHOOTING
If one of the following anomalies occurs, switch the appliance off, disconnect
it from the electric power supply and contact your dealer.
a. A safety device, such as a fuse or switch, intervenes frequently.
b. The appliance has a water leak.
c. Other malfunctioning.
9.1 - SYMPTOMS THAT DO NOT INDICATE APPLIANCE MALFUNC-
TIONING
White mist escaping from the appliance
If the cooling function is started in a room with high humidity level an the inside of the
appliance is very contaminated, the distribution of the temperature is not regular. In this
case, it will be necessary to clean the inside of the appliance.
Contact your dealer for additional details regarding cleaning the appliance.
This operation requires a qualified professional.
EN - 38