Olimpia splendid Bi2 WALL TR 1000 Instructions For Use And Maintenance Manual page 80

From remote controller
a. This function can be selected by pressing key "B2" until when the two heating
(D10) or cooling (D11) symbols are both off.
b. Under this operating mode, the internal fan is always on and it is possible to select
the desired speed of the fan at any moment by pressing the specific key "B6".
In fan mode, the solenoid valve remains disabled, while the fan is
activated at the set speed.
7.8.1 - Operation at maximum speed
From board the machine
a. To select this mode, press key "
activates.
b. With this mode it is possible to obtain the maximum supplied power both in cooling
and heating modes (the fan motor is always activated at maximum speed).
From remote controller
a. To select this mode, press key "B6" several times until the indicator (D6) activates
completely.
7.8.2 - Operation at AUTO speed
From board the machine
a. To select this mode, press key "
activates.
b. In this mode, the fan speed adjustment is completely automatic between a minimum
and maximum value, according to the heating or cooling needs of the room.
From remote controller
a. To select this mode, press key "B6" several times until the indicator (D5) activates.
7.9 - NIGHT OPERATION
From board the machine
a. To select this mode, press key "
activates.
b. The function deactivates automatically when the fan speed is changed by means
of the key "
EN - 32
" (T2).
" (T2) several times until the indicator (A4)
" (T2) several times until the indicator (A3)
" (T2) several times until the indicator (A1)