Call Status Area; Dial/Hangup Button; Speed Dial List - NEC SMB8000 Manual

Issue 2.01
___________________________________________________________________________________
2.2
2.3
2.4
___________________________________________________________________________________
3 - 12
With a phone number highlighted in another Windows application,

pressing <Ctrl+C> copies the selected number into the dial string field.

Call Status Area

The Call Status Area is shown below the Recent Call List.

Round icons are used to represent the calls that are active on the phone.

The color of each icon indicates the call status as follows:

Ringing (Red)

Active (Green)

Held (Yellow)

When a call first enters the ringing state, a tooltip balloon is displayed

over the call status icon.
Hovering the mouse over an icon displays the tooltip balloon for the

selected call.
The following information is included in the tooltip balloon, based upon

the type of call:
Line/Trunk Number

Connection Status

Calling Party/Called Party Identification

Time in current state

User-Defined Notes


Dial/Hangup Button

The Dial/Hangup button is used to control the hookswitch function.

When the phone is idle, the button shows the Dial icon.

When the phone is busy, the button shows the Hangup icon.

Pressing the Dial button initiates a call to the number entered in the Dial

String field.
Pressing the Hangup button disconnects the active call.


Speed Dial List

The combo box next to the Dial button provides access to the Speed Dial

list.
Clicking on an entry in the Speed Dial list immediately generates a call to

the selected number.
Entries are added to the Speed Dial list through the Directory/Contact

List/Personal windows.
SMB8000
Desktop Application Startup