Table of Contents
Advertisement
39
Indication for the Status LED
The Internal LTO status is notified by Status LED.
For basic LED operation during normal operation, see
The following table shows the meaning of different LED patterns to help troubleshooting.
Table 1 LED troubleshooting
LED Sequence
1
2
3
4
5
All LEDs OFF.
"Part Name and
Cause
Drive might not have power,
may be faulty or may have
been power cycled or reset
during a firmware upgrade.
Function".
Ready: green
1
Drive: amber
2
Tape: amber
3
Clean: amber
4
Encryption: blue
5
Action required
Make sure the drive is powered on. The power on/off
switch on an external drive incorporates a green LED.
Check the power cable connection and replace the
cable if necessary. On external drives, you can use the
power cable from your monitor or another device to
check that the connection is working.
If the power supply is present and all LEDs remain off,
power cycle or reset the drive. If it still fails, call for
service.
Advertisement
Table of Contents
