Figure 4-2 Transfer Call - Start - NEC SMB8000 Manual

SMB8000
___________________________________________________________________________________
1.4
___________________________________________________________________________________
Desktop Applications
Alternately, the user can select an entry from the Destination drop down

list.
The Destination drop down list includes a list of the most recent transfer

destinations entered in this dialog box.
The actions associated with each of the dialog buttons are described in the
following sections.
1.3.1 Transfer Call – Start
When the Start button is selected, the software will initiate a
supervised transfer of the call. The Transfer dialog will be updated
(refer to Figure 4-2 Transfer Call –
Selecting the Complete button will connect the original caller to the

destination and disconnect the user.
Selecting the Disconnect button will hang up from the call to the

Destination, and reconnect to the original caller.
1.3.2 Transfer Call – Blind
When the Blind button is selected, the application will initiate an

unsupervised transfer to the specified destination.
Once the transfer is complete, the active call will be removed from the

active call area (Full Window and Toolbar modes).
1.3.3 Transfer Call – Cancel
When the Cancel button is selected, the transfer operation will be

cancelled and the Transfer dialog will be closed.
Pressing the Esc key will also initiate the Cancel operation.

Hang Up
The Hang Up button will disconnect the user from the active call.

When the active call is disconnected, the associated entry in the Active

Call list will be removed (Full Window and Toolbar modes).
Start).
Figure 4-2 Transfer Call – Start
Issue 2.01
4 - 3