24
Indication for the Status LED
The drive status is notified by Status LED
Status LED (color)
Ready (green)
Drive (amber)
Tape (amber)
Clean Cartridge (amber)
Reading/Writing Data
To read/write the data from/to the data cartridge, see the instruction manual provided with
the backup application.
Condition of
Status Light
Solid
The LTO can be used.
Unlit
The LTO is powered off.
Flashing
(same
The LTO is used.
interval)
The Cartridge is eject preparation completed
Flashing (repeat
status. Press the "Eject" button, then the
of twice flashing)
cartridge will be ejected.
Unlit
No error.
Flashing
Hardware error is detected in the drive.
Unlit
No error.
Flashing
A tape inserted into the drive may have a
defect. Use another tape.
Solid
The cleaning cartridge is used.
Unlit
Cleaning is not required.
The drive must be cleaned. Refer to the page
Flashing
25 and clean the drive.
Meaning