Sony NWS-1510 Service Manual page 113

diag> serial -v
SERIAL PORTS CHECK:
Set TEST PROBE to the SERIAL PORT CH.1 and hit <RETURN> key
SERIAL PORT CH.1:
Controller open .................... OK
Characters loopback ................ OK
DTR->DCD/DSR loopback 0 ............ OK
DTR->DCD/DSR loopback 1 ...•........ OK
RTS->CTS/RI loopback 0 ..........•. OK
RTS->CTS/RI loopback 1 .........•.. OK
Exchange TERMINAL from CH.Oto CH.1 and hit <RETURN> key (•)
Set TEST PROBE to the SERIAL PORT CH.O and hit <RETURN> key
SERIAL PORT CH.O:
Controller open .................... OK
Characters loopback ................ OK
DTR->DCD/DSR loopback 0 •........... OK
DTR->DCD/DSR loopback 1 ............ OK
RTS->CTS/RI loopback 0
••f • · · · · · · · ·
OK
RTS->CTS/RI loopback 1 ............ OK
diag> !! -chO
serial -v -chO
SERIAL PORTS CHECK:
diag>
Set TEST PROBE to the OPTIONAL SERIAL PORT CH.O and hit <RETURN> key
OPTINAL SERIAL PORT CH.O:
Controller open .................... OK
Characters loopback ................ OK
DTR->DCD/DSR loopback 0 ............ OK
DTR->DCD/DSR loopback 1 ............ OK
RTS->CTS/RI loopback 0 ............ OK
RTS->CTS/RI loopback 1 ............ OK
*
Note: I/O cannot be performed with I/O devices if a serial
port other than CH.O is used.
NWS-1510/1530/ 1580 4-21