Table of Contents
Advertisement
System Information
All the information about the current status of the COLORado PXL Curve 12 is available through the
product's Information menu. To view this information, follow the instructions below:
1. Go to the Information main level.
2. Choose the desired information from the following:
•
Firmware Version – displays the current firmware version
•
Running Mode – displays the current running mode
•
Address – displays the current starting address
•
Temperature – displays the current product temperature in °C
•
Fixture Time – displays the number of hours the fixture has been powered on
•
LED Hours – displays the total hours the LED has been powered on
•
ArtNet Info – displays the current IP address, Subnet Mask, and MAC address
•
Device UID – displays the product UID
•
Fan Information – displays the speed of head fans, defrost fans, and base fans
Offset Mode
The offset mode provides fine adjustments for the home position of all the moving parts in the optical path
and the tilt movements. This ensures that the moving parts do not show any border or reduce the light
output when in their home position.
1. Starting from the Main Level screen, press and hold <MENU> until the passcode screen appears.
2. Enter the passcode 2323.
3. This direct the user to the Zero Adjust menu screen.
Tilt
To adjust the starting point of the tilt motor, do the following:
1. Select TILT.
2. Increase or decrease the starting value, from 000 to 255.
Zoom
To adjust the starting point of the zoom motor, follow the instructions below:
1. Select ZOOM1 or ZOOM2.
2. Increase or decrease the starting value, from 000 to 255.
MAC Address
To adjust the fourth, fifth, and sixth digit of the MAC address, do the following:
1. Select MAC4, MAC5, or MAC6.
2. Increase or decrease the starting value, from 000 to 255.
36
COLORado PXL Curve 12 User Manual Rev. 4
Operation
Advertisement
Table of Contents
