Factory Reset Function; System Information - Chauvet Rogue R3 Spot User Manual

Table of Contents

Gobo&R/Gobo2 Reset

This option resets the Color/Frost functions to the home position.

Highlight Gobo&R/FGobo2, press <ENTER>.

Select YES or NO, press <ENTER>.

Focus/Iris Reset

This option resets the Zoom function to the home position.

Highlight Focus/Iris, press <ENTER>.

Select YES or NO, press <ENTER>.

All Reset

This option resets the all the functions to the home position.

Highlight All, press <ENTER>.

Select YES or NO, press <ENTER>.

Factory Reset Function

This reverts the product back to its original factory settings.

Starting from the Setup screen level, select Factory Settings, select <YES/NO> and press <ENTER>..

This programming level shows standard information regarding the product's operating status. Starting from

the Main Level screen, select Sys Info, press <ENTER>.

•

Ver: The current software version is displayed on the screen.

•

Running Mode: The current Running mode is displayed on the screen.

•

DMX Address: The current DMX address is displayed on the screen.

•

Temperature: The current product temperature is displayed on the screen.

•

Fixture Time: The product's total running time.

•

UID: Shows the product's UID

Offset Mode Offset Mode

The Offset mode provides fine adjustments for the home position of all the moving parts in the optical path

as well as the pan and tilt movements. This way, when in their home position, the moving parts do not

show any border or reduce the light output.

1. Starting from the Main Level screen, Press and hold <MENU> until the passcode screen appears.

2. Using <UP> to increase the number value and <DOWN> to move to the next column, enter 2323,

press <ENTER>. This brings you into the Zero Adjust menu screen.

Pan

1. Highlight PAN, press <ENTER>.