Fan Mode
This setting determines how the fan speed on the Ovation P-56UV is set.
1.
Go to the Fan Mode main level
2.
Select Auto (fan speed will increase or decrease based on product temperature), Off (fan will
stay off. Product output will decrease based on product temperature), Silent (fan will maintain a
constant silent speed), or On (fan speed will always be at maximum).
WARNING: When operating in Fan Mode: Off, the fixture will become hotter to the
touch than when using other fan modes. Use proper protective equipment to prevent
burns. Keep a safe distance from flammable objects.
NOTICE: When operating in Fan Mode: Off, output of the fixture will be reduced and
will not reach the same levels as when using other fan modes.
Back Light
This setting allows for selection of the amount of time the backlight on the Ovation P-56UV's display stays
on after the last button is pressed on the control panel.
1.
Go to the Back Light main level.
2.
Select 10S (10 seconds), 30S (30 seconds), 2min (2 minutes), or Always On (remains on).
System Information
This option displays the total number of hours the product has run, the installed software version, and the
product's UID.
1.
Go to the Information main level.
2.
Select Fixture Hours, LED Hours, Version, or UID.
Factory Reset
This option restores the Ovation P-56UV to factory default settings.
1.
Go to the Factory Reset main level.
2.
Select No or Yes.
Page 12 of 16
O
PERATION
Ovation P-56UV User Manual Rev. 5