Download  Print this page

Adding Staples - Xerox DocuColor 12CP User Manual

For document centre color series 50 and docucolor 12
Hide thumbs

Advertisement

Adding staples

Check the printer regularly and load a new Staple Pack when needed.
Ensure that you have a new Finisher Staple Pack on hand before beginning this
procedure. Do not use a Convenience Staple Cartridge. The staples are not
interchangeable.
NOTE: The Finisher Staple Cartridge is reusable and should not be thrown away.
1
Open the Finisher Front Door, located on the
lower right front of the Finisher.
2
Squeeze the Gold Release Latch until the Staple
Cartridge is released (Figure 3).
3
Lift the Staple Cartridge slightly and remove it
from the cartridge holder (Figure 4).
IN-LINE STAPLER FINISHER USER GUIDE
Figure 3: Pressing the Gold Release Latch
Figure 4: Removing the Staple Cartridge
19

Advertisement

Table of Contents
loading

  Also See for Xerox DocuColor 12CP

  Related Manuals for Xerox DocuColor 12CP

This manual is also suitable for:

In-line stapler finisher