Bypass Transport (4850 And 4890 Only) - Xerox DocuPrint 92C System Overview Manual

Printer components and options

Bypass transport (4850 and 4890 only)

3-11
The optional bypass transport enables individual printed sheets
of paper to pass through the NPS/IPS output tray to third-party
finishing devices. These devices perform a variety of finishing
tasks, such as saddle-stitching, binding, folding, stapling,
trimming, and stacking.
The bypass transport fits into tray 1 of the NPS/IPS dual stacker.
Printed pages flow from left to right (when viewed from the front
of the printer). The printed pages travel through the NPS/IPS
output module and bypass transport, out of the paper exit slot,
and into the finishing device. For paper up to 14 inches long, the
maximum delivery rate is 92 sheets per minute.
Figure 3-8. 4890/92C printer with bypass transport and dual
stacker
1. Bypass transport
2. Bypass transport support
1
2
System Overview Guide