Problem Solving; Clearing Media Jams - Xerox 8850 Operator's Manual

Clearing media jams

XES SYNERGIX 8850 PRINTER OPERATOR MANUAL
6.
This chapter provides information for resolving various problems
that can occur during the operation of the printer. It contains
instructions for clearing media jams. It also includes status code
and error message tables, as well as a general problem-solving
table. If you are unable to resolve the problem, follow the
procedure for calling for service at the end of the chapter.
When the printer experiences a media jam, the following occur:
The alarm beep (if enabled) sounds.
The indicator light on the graphic display in the area of the jam
flashes.
A status code and instructions for resolving the problem
appear in the message display.
To clear the jam:
Observe the location of the flashing indicator light on the
graphic display
Follow the instructions in the message display and in this
section of the operator manual.

Problem solving

35