Technical Data; Product Specifications - Xerox 8850 Operator's Manual

Product specifications

Process speed
Resolution
Environmental requirements
Weight
Dimensions
Audible noise
Power consumption
Heat output
Finishing
XES SYNERGIX 8850 PRINTER OPERATOR MANUAL
7.
This chapter provides the product and media specifications for the
XES Synergix 8850 Printer. It also provides the space
requirements for normal operation after product installation.
Table 5. Hardware specifications
4.5 ips
400 dpi
Minimum: 60° F (10° C) at 20% relative humidity
Maximum: 80° F (27° C) at 80% relative humidity
Maximum elevation: 10,000 feet (3048 meters)
575 lbs (261 kg)
Width:
As delivered - 23 inches (584 mm)
With output tray and AccXES controller installed - 62 inches (1575 mm)
Depth: 57 inches (1448 mm)
Height: 42.5 inches (1080 mm)
67 db @ Max.
Typical power consumption for US 220V @ 20A:
Warm-up – 4660 watts
Standby – 1000 watts
Operating – 2100 watts
Rest - 120 watts
Warm-up: 14,500 BTU/hour
Standby mode: 4,000 BTU/hour
Print mode: 7,200 BTU/hour
Standard catch tray
Optional on-line folder
Optional Synergix Stacker

Technical data

47