Problem Solving Table - Xerox 8850 Operator's Manual

PROBLEM SOLVING

Problem solving table

Condition
Portions of the prints are deleted.
The prints are light overall.
The tracing paper has wrinkles.
44
The table below lists some conditions that may occur during the
operation of the printer. You may be able to resolve the problems
by following the suggested solutions in the table. For problems
beyond the scope of this table, call for service.
Table 4. Problem-solving table
Causes
The media may be damp.
The print density may be too light.
The media may be too damp.
The media may be too dry.
Suggested Solutions
Check the condition of the media. If
damp, replace it.
Use the Printer Menu to adjust the
print density. Refer to "Adjusting
the print density" in this manual.
Use a sealed media drawer.
Use a sealed media drawer.
Store the media in a sealed
package or bag.
XES SYNERGIX 8850 PRINTER OPERATOR MANUAL