<
5-38
Care and Maintenance
ADJUSTING THE PRINT DENSITY
The print density has been adjusted to the
proper level at the factory and normally does
not require any adjustment.
however, it may be necessary to adjust the
print density for darker or lighter prints for
one or more of the following reasons:
F
F
Figure 5-33.
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
cut top 2"
When a different paper is used
When temperature and/or humidity have
changed dramatically
Opening the Top Cover
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
From time to time,
cut 1">