Xerox 4215 User Manual page 35

<
Auto Tray Swap The Auto Tray Swap menu item
allows you to switch automatically to another
tray, containing the same size paper, when the
active tray is empty.
item selects the order in which trays are used
as the paper source.
F
F
If you want Auto Tray Swap to utilize all
available paper trays, all trays should contain
the same size paper.
Print Reports
You can print several reports from the control
panel.
information contained in each report.
reports you can print include:
F
F
F
cut top 2"
The Off selection means paper is fed from
one tray only.
The On selection means when the paper tray
empties, the next paper tray with the
correct size paper becomes active.
the factory default setting.
This section briefly describes the
Font Report
Hardware Status Report
Error Log
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide
The Auto Tray Swap menu
For example:
cut 1">
2-17
*On is
The