Xerox 4215 User Manual page 47

<
F
F
F
cut top 2"
without using the control panel or remote
software commands.
factory default.
NOTE: The printer type for the Other I/O
must be set to *PS/PCL Sensing .
Standard (STD) PostScript -- with this
setting, the printer recognizes only the
standard PostScript page description
language to describe the appearance of a
printed page. Some of the 256 characters
used by PostScript are interpreted as
control functions only and cannot be
transmitted as data.
are:
End of job
—
Status (e.g., printer idle)
—
Abort (e.g., cancel)
—
Xon
—
Xoff
—
PCL 5 -- with this setting, the printer
recognizes only the PCL 5 command set for
defining a page, selecting fonts, etc.
Binary Communications Protocol (BCP)
PostScript -- allows any of the 256 possible
8-bit values to be transmitted as data and
allows certain characters to also specify
control functions, such as:
End of job
—
Status (e.g., printer idle)
—
Abort (e.g., cancel)
—
Xon
—
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide
*PS/PCL Sensing is the
The control functions
cut 1">
2-29