Xerox 4215 User Manual page 143

<
F
F
F
F
F
cut top 2"
Default Font: The FGID and Font Width are
indicated for the selected default font.
The IPDS Resident Fonts list printed with
the IPDS - Settings Printout gives samples
of the fonts.
Report Margins to System:
or No. If set to Yes, the margins for the
paper sizes in the active trays are reported
to the system.
for the paper size of the emulated printer
are reported. The default setting is No.
Report Margins to System must be set to Yes
if the VPA check is set to Margins.
VPA Check: Defines which margins whould be
used to determine if a VPA exception
condition exists which has to be reported to
the system. VPA checking is done by
comparing the system's logical page and the
printable area defined for the printer
emulation selected.
are Margins, Physical Page, IPDS Logical
Page, and No VPA.
checking is done by comparing the system's
logical page with the printable area defined
for the printer selected.
setting is Physical Page.
IM Smoothing: Can be set to Yes or No.
set to Yes the IM (image) smoothing function
will make fine adjustments to IM scaling.
The default is Yes.
Add margins: Can be set to Yes or No.
set to No, indicates there is no offset out
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
Can be set to Yes
If set to No, the margins
Choices for VPA Check
If set to Margins, VPA
The default
cut 1">
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide 4-59
If
If