<
G-8
Paper Facts
Follow the paper specifications outlined in
Table G-2 when selecting label stock.
Label Properties
Face Sheet
Fusing
Construction
Transparencies
Table G-3 summarizes the specifications to
consider when selecting transparencies.
Transparencies
Properties
Thickness
Cutting
Dimension
Cutting angle
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
cut top 2"
Table G-2
Label Specifications
Specification
Must meet specifications in
All adhesives, liners,
facestocks and other materials
used in the label construction
must be compatible with the
heat and pressure of the fusing
process.
discolor, melt, offset material
Total construction caliper must
not exceed 0.0070 inches (0.18
Table G-3
Transparencies Specifications
0.110 mm
+/- 0.7 mm
90° +/- 0.2°
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Materials must not
Specification
3.9 to 4.5 mils
0.031 inch
cut 1">