<
D.
Setting the Communications Port to Priority Other I/O
To change the communications port scheme from
Sequential to Priority Other I/O (twinax or
coax):
1. Press the Menu key to take the printer
2. Press the Down arrow key until the display
3. Press the Enter key.
4. Press the Down arrow key until the display
5. Press the Enter key.
6. Press the Down arrow key.
cut top 2"
offline and display the Control Panel Main
Menu.
The display reads:
LANGUAGE
= English
reads SETUP PRINTER.
PRINTOUT MENU.
reads OPTIONS.
PwrUpStartPage
=On
reads:
SetComPriority
=Sequential
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide
The display reads
The display reads:
The display
cut 1">
2-47