Adjusting The Density; Refreshing The Toner - Xerox VersaaLink B600 User Manual

Maintenance
7. To save your settings, touch OK.
8. As needed, to enter additional values, repeat the previous steps.
9. Print another sample page, then repeat the process until you complete the registration corrections.
10. To return to the Home screen, press the Home button.

Adjusting the Density

The Adjust Density feature controls how much toner is used to print. Adjust the density for lighter toner
use for saving toner, or adjust for heavier density to make prints bolder. A positive adjustment makes
the prints darker, while a negative adjustment makes the prints lighter. You can also adjust density to
compensate for different paper types and thicknesses.
To adjust the density:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Adjust Density > Density Level.
3. To adjust the density level, move the slider.
4. To save your setting, touch OK.
5. To return to the Home screen, press the Home button.

Refreshing the Toner

Toner Refresh recalibrates toner concentration and developer voltages. If you print documents with
high or low toner coverage, Toner Refresh can optimize print quality.
Note
Do not use this procedure repeatedly. Running the procedure repeatedly uses the toner supply more
quickly.
To refresh the toner:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Toner Refresh.
3. To perform a Toner Refresh process, touch Start.
4. At the successfully completed prompt, touch Close.
5. To exit the menu, touch X.
6. To return to the Home screen, press the Home button.
® ®
7-8 Xerox VersaaLink B600/B610 Printer
User Guide