Xerox 4215 User Manual page 48

Xerox 4215: user guide
Hide thumbs Also See for 4215:
Table of Contents

Advertisement

<
2-30
Using the Control Panel
F
F
Serial Setup
The following serial interface parameters may
be configured to match the settings on your
host computer:
F
F
F
F
F
Flow Control The Flow Control menu item
regulates the flow of data to the printer for
the serial connection.
communication protocols can be selected:
F
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
cut top 2"
HexDumpMode -- this setting is a data analysis
tool that diagnoses application software
related problems and communication problems.
Tagged Binary Communications Protocol
PostScript (TBCP PS) -- allows individual
applications to enable or disable binary
communications on a per job basis with begin
and end protocol functions.
characters can be interpreted as data and
some can also be interpreted as control
functions.
TBCP PostScript has the same
control functions as BCP PostScript plus the
begin and end protocol functions.
Flow control
Baud rate
Data bits
Parity
Data Terminal Ready (DTR) Polarity
Xon/Xoff--this is a data stream handshake
where the printer sends an Xon (DC1; 11HEX)
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
All 256
The following
cut 1">

Advertisement

Table of Contents
loading

This manual is also suitable for:

4219

Table of Contents