Time And Status Display - Xerox 4050 Operator's Manual

Time and status display

XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE
[time]
Specifies the time to set as the system time. Use the
hh:mm:ss format in a 24-hour clock. You can separate
numbers by a colon or by a space. You do not need to
enter the seconds.
Example: SETTIME 04-APR-93 14:27
Use the TIME command to verify the time and date maintained
by the system, or to turn the display on and off.
TIME [ON|OFF]
ON
Turns display on, and keeps it updated.
OFF
Turns display off.
The time and status display has one to five lines of information,
each consisting of two spaces and eight characters of status
information. Figure 6-1 shows the display format.
Figure 6-1. Time and status display
..hh:mm:ss
..PF: xx%
..QM:nnn
..IiiiOooo
..HostStat
The first line is always the current time of day.
The second line reflects the percentage of the print file currently
free, or unused. The percentage can range from 0% to 100%.
The 0% indicates print file saturation. A 100% indicates the print
file is empty. If this information is not provided by the Queue
Manager task for any reason, this line will not be displayed, and
all following lines of the Time-of-Day display will be moved up.
Note that the print file may indicate less than 100% free when
the print queue is empty. This situation is caused by one or
more cylinders being marked unavailable due to bad areas of the
system disk being included in the print file area. This situation
can also occur if areas of the print file are manually declared to
be flawed and unavailable through the BBU utility program. For
more information on the print file, refer to the REALLOCATE
command.
The third line reflects the number of reports currently in the
Queue Manager queue. The number nnn can range from 1 to
999. If more than 999 reports are in the queue, the line is
displayed as:
QM: >999
This information is only displayed if it is not zero. If there are no
reports in the queue, this line is not displayed, and all following
lines of the Time-of-Day display will be moved up.
The fourth line reflects the status of input and output processing
if they are processing. Otherwise, this line is blank.
PRINTER MAINTENANCE
6-25