Xerox 4050 Operator's Manual page 102

PRINTER MAINTENANCE
6-14
[disk-id]
Identifies the system disk containing the file (DP1:,
DP2:, or DP3:). You do not need to enter this
parameter.
file-id
Specifies the full name of the file to be copied
(including its extension).
[output-file-id]
Specifies the name of the file to be written if it is
different than the name of the source file. If output-
file-id is not specified, the name of the source file is
used.
ALL|file-type
Specifies the files to copy:
ALL
Copies all files on the tape to the system disk.
file-type
Copies all files with a specified extension (file type)
to the system disk.
e. To copy files from the system disk to a diskette, enter
the following command:
FLOPPY SAVE [REVIEW] [disk-id] [input-file-id [output-
file-id] ALL|file-type]
[REVIEW]
Displays a warning message when the file to be copied
is about to overwrite a file of the same name already
on the diskette, and asks if you want to continue.
Enter Y to overwrite the file, N to skip the file, or X to
abort the copy process.
[disk-id]
Identifies the system disk containing the file (DP1:,
DP2:, or DP3:). You do not need to enter this
parameter.
[input-file-id]
Specifies the full name of the file to copy (including its
extension).
[output-file-id]
Specifies the name of the file to be written, if it is
different than the name of the source file. If no
output-file-id is specified, the name of the source file
is used.
ALL|file-type
Specifies the files to copy.
ALL
Copies all files on the tape to the diskette
file-type
Copies all files with a specified extension (file type)
to the diskette.
XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE