Automatic Document Feeder Misfeed - Xerox WorkCentre Pro 16p User Manual

Automatic Document Feeder Misfeed

When a misfeed occurs in the feeder, the red ADF misfeed indicator flashes on the Copier
Diagram, and an A1 or A2 status code will flash in the display window. The status code indicates
the number of originals that must be returned to the feeder after clearing the misfeed.
A1 status code- refeed the last original.
A2 status code- refeed the last 2 originals.
This code will disappear when copying is resumed or the clear key is pressed.
Details for clearing the three types of feeder misfeeds are given below.
Input Misfeed
Exit Misfeed
Roller Misfeed
1. Open the feeding roller cover and pull the original gently
to the left and out of the document feeder tray.
2. Close the feeding roller cover.
3. Open and close the document cover to clear the
misfeed indicator.
4. Press Start to continue copying.
1. Open the document cover and turn the roller knob to
remove the misfed original from the exit area.
If paper cannot be easily removed, skip to the Roller
Misfeed.
2. Close the document cover.
3. Press Start to continue copying.
1. Open the document cover and turn the roller knob to
remove the misfed original from the document feeder
tray or the exit area. If the original is difficult to remove,
gently remove it from under the feeding roller.
2. Close the document cover.
3. Press Start to continue copying.
31