J2 Drum Cartridge Replacement - Xerox WorkCentre Pro 16p User Manual

Xerox workcentre pro 16p: user guide
Hide thumbs Also See for WorkCentre Pro 16p:
Table of Contents

Advertisement

J2 Drum Cartridge Replacement

The useful life of the drum cartridge is approximately 18,000 copies. The drum cartridge indicator
on the machine diagram lights when the drum is near the end of life. Approximately 1,000 more
copies can be made, but you should have a replacement cartridge in stock. When the J2 Status
Code is displayed, the machine will stop operating until the drum cartridge is replaced.
36
Note: Ensure that the alternate paper tray is lowered.
1. Press the release lever to open the side cover (A).
2. Press the front cover release buttons to open the front
cover (B).
3. Press the green button (C) on the front of the toner
cartridge and pull out the cartridge.
Note: The toner cartridge must be removed before
removing the drum cartridge.
4. Pull out the drum cartridge.
Note: Help the environment by recycling your used drum
cartridge. Refer to the recycling brochure packed with the
drum cartridge for details.
5. Remove the cover from the new drum cartridge.
CAUTION: Do not touch the shiny surface of the drum.
6. Slide the new drum cartridge in place, making sure not
to touch the surface of the drum.
7. Reinstall the toner cartridge.
8. Close the front cover and the side cover.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ly8 - workcentre pro 16p b/w laser printer

Table of Contents