Xerox WorkCentre 7232 Scanner Setup Manual page 16

Procedure for Scan to PC (FTP/SMB)
After the appropriate Ports have been enabled and TCP/IP has been configured, the Scan to
PC (FTP/SMB) feature can be used as follows.
1.
Select Scan to PC from the All Services screen.
2.
Touch Transfer Protocol, select a protocol, and touch Save.
3.
Touch the blank lines on the screen and manually enter Server settings. For SMB you
can also browse the Microsoft Network.
4. Place your document in the document handler and press Start. Progress of the data
transfer will be displayed on screen
Copyright © 2007, Xerox Corporation. All rights reserved.
16
Scan to PC (Optional)