Analog Devices EVAL-ADE9113 User Manual page 8

User Guide EVAL-ADE9113
EVALUATION BOARD HARDWARE
Using the EVAL-ADE9113EBZ with Another
Microcontroller
It is possible to manage the EVAL-ADE9113EBZ with a different mi-
crocontroller mounted on another board. The EVAL-ADE9113EBZ
can be connected to this microcontroller board through the P1,
P2, P3, P4, and P5 connectors on the MCU adapter board. These
connectors are setup in an Arduino form factor that is compatible
with a variety of microcontroller development boards. The SDP-B
adapter and the SDP-B Blackfin boards are, in this case, left
unused.
analog.com Rev. 0 | 8 of 18