Intended Use - Assa Abloy KESO eCLIQ Operating Instructions Manual

Intended use

The eCLIQ electronic locking cylinder is suitable for commercially available
doors with DIN mortise locks for profile cylinders. It has been developed
and manufactured for use in internal and external doors, also with high
frequency use.
The eCLIQ electronic locking cylinder can be used on fire barriers. Observe
the applicable regulations for use in fire doors.
The configuration and access modification, for example setting times and
time profiles, master card, code, etc., must takes place via the CLIQ man-
agement software. Changes may only be made by authorised persons
(administrators).
Logs and lists with recorded events with and without a time stamp, au-
thorised accesses, denied accessed etc. can only be created by adminis-
trators. This function can be deactivated (V2 = WITHOUT AUDIT).
If the data memory is full, older entries are overwritten by new entries.
34 EN Notes