Assa Abloy KESO eCLIQ Operating Instructions Manual page 45

A
At tention!
Working on the door leaf: For work on the door leaf, such as drilling or
cutting, the eCLIQ electronic locking cylinder and the mortise lock must
be removed.
Application of force can destroy the locking cylinder: The application
of force, e.g. striking with a hammer, can damage or destroy the locking
cylinder.
Torsion-free installation: The eCLIQ electronic locking cylinder must be
installed tension-free according to the installation situation. Only screw
in the cylinder fixing screw hand-tight (max 3.5 Nm).
The eCLIQ electronic locking cylinder must be installed in the appro-
priate size: The eCLIQ electronic locking cylinder is produced in multiple
cylinder lengths („Technical data", page 48). Before installation, make
sure that the eCLIQ electronic locking cylinder is in the size matching the
door leaf thickness. The eCLIQ electronic locking cylinder may not protrude
more than 3 mm beyond the fitting surface.
Installation and adjustments according to DIN EN 15684:2021-05: All
components must be installed and adjusted in a manner which ensures
conformity with DIN EN 15684:2021-05.
I
Note!
Protection against dirt: for outdoor use and for dusty environments the
locking cylinder should be protected with the SuR cap from ASSA ABLOY.
Cylinder mounting EN 45