SECTION 6: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Schedule
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To maintain a low risk of injury and proper
machine operation, if you ever observe any of the
items below, shut down the machine immediately
and fix the problem before continuing operations:
•
Damaged or worn sanding belt.
•
Worn or damaged wires.
•
Any other unsafe condition.
After Each Use:
•
Clean/vacuum dust buildup on table and
motor..
-22-
Cleaning
Cleaning the Model H3140 is relatively easy.
Vacuum excess sawdust, and wipe off the remain-
ing dust with a dry cloth. Wiping the table clean
after every use ensures moisture from wood dust
does not remain on bare metal surfaces.
If any resin has built up, use a resin dissolv-
ing cleaner to remove it. After cleaning, treat all
unpainted metal surfaces with a non-staining
lubricant with products like G96
SLIPIT
, or Boeshield
®
®
Lubrication
Since all bearings are sealed and permanently
lubricated, simply leave them alone until they
need to be replaced.
Model H3140 (Mfd. Since 6/02)
Gun Treatment,
®
T-9.