Print Options And Override Hierarchy - Xerox DocuColor 40 Printing Manual

A
A-2 Print Options
Option and settings:
(Default setting is underlined)
Brightness
85% Lightest/90% Lighter/
95% Light/100% Normal/105% Dark/
110% Darker/
115% Darkest
CMYK Simulation
Printer's Default/SWOP-Coated/DIC/
Euroscale/Custom-1/Custom-2/
Custom-3/Custom-4/Custom-5/None/
Match Copy
CMYK Simulation Method
Printer's Default/Quick/Full
Collation
Collated/Uncollated
Color Mode
CMYK/Grayscale

Print options and override hierarchy

In the following table, the default printer driver settings (PPD defaults) are underlined.
The Printer's Default setting indicates that a default has been specified in
DocuColor 40 CP Setup. To find out about the current Setup defaults, print the
Configuration page from the DocuColor 40 CP Control Panel.
The override hierarchy is as follows:
• A user's printer driver settings override the DocuColor 40 CP Setup settings.
• Settings made from WebSpooler override the user's printer driver settings.
Description:
Select for a substantially lighter
85%
image, for a substantially darker
115%
image, or one of the settings in between.
Select a CMYK simulation target to use
for the job.
Select to apply one-dimensional
Quick
transfer curves that adjust output density.
Select to apply four-dimensional
Full
transfer curves that adjust hue as well as
output density.
For a multiple-copy, multiple-page job,
specify whether or not to collate the job.
Specify the color mode for the current
print job. Select
CMYK
document or
Grayscale
black-and-white document.
Requirements, constraints,
See the Color Guide for more
information.
See the Color Guide for more
information.
for a full-color
for a grayscale or
and information: