Xerox DocuColor 40 Printing Manual page 58

A
A-6 Print Options
SWOP-Coated
—Uses the Japanese press standard.
DIC
—Uses the European press standard.
Euroscale
Custom-1(2, 3, 4, 5)
you are required to create a new simulation goal with Print Calibrator and name the
simulation goal exactly as it appears in the options list.
—Uses no simulation goal. Select this setting when the CMYK data for your job
None
has already been separated for your specific printer (for example, when using the Color
Management System built into your computer to convert the CMYK data to the
printer's color space).
—Uses no calibration or simulation goal. Select this setting when you want
Match Copy
to bypass DocuColor 40 CP calibration and simulation.
For more information about calibration, see the Job Management Guide.
Combine Separations
The Combine Separations option specifies whether to combine color separations
created in desktop publishing applications on a single page to simulate printing on a
press from film separations. It allows you to proof overprinting, trapping, and other
four-color printing effects before having film separations created. It also enables you to
combine Desktop Color Separations (DCS) format files to print them at full resolution
instead of printing the low-resolution master file.
Your job must have been printed as color separations or DCS format when you printed
it from your application. If you did not print the job in this manner, the Combine
Separations option has no effect.
This option is supported only for Adobe PageMaker and QuarkXPress.
N :
OTE
—Uses the United States press standard.
—Uses a custom simulation goal. Before selecting this setting,