Flue Gas Measurement In Burners - TESTO 325-3 Instruction Manual

Connect probe
Self-test
If the flue gas probe is in a vertical position or at an angle of
45°, the condensate drops which develop could result in a
sudden drop in temperature.
Remedy:
Position the flue gas probe horizontally.
After every measurement rinse the measurement cells
with fresh air (Pump Start/Stop) until the CO level is below
50 ppm.
Battery capacity
USA V 13
5 s
6.0
Measurement menu
T325-3
100
Pump is
on
Example of measurement

Flue gas measurement in burners

Initialisation phase
3 s
43
T325-3
257
T325-3
78
0.048
8
Switch on
testo 325
T325-3
60 s
100
T325-3
T325-3
64
100
Printout