Transportation & Storage; Service; Maintenance; Repair Parts & Accessories - Greenlee GATOR EK425LXR Operation Manual

Table 11: OLED Screen Error Codes
Code Error
1 Over current fuse
2 Over current comparator
3 Overheated circuit board
4 Overheated battery
Battery empty: operation
5
stops
6 Faulty cut; complete cycle
7 Faulty cut; incomplete cycle
8 Low battery
9 Battery empty
10 Real-time clock battery low
11 Tool deactivated
12 Service necessary
13 Real-time clock not found
Wireless Bluetooth
14
not found
15
16 Pressure sensor not found
17 Pressure exceeded
Battery temperature too
18
low
21 Remote control battery low
Transportation & Storage
Fully retract ram and remove battery and tool from hot
stick before transporting or storing. Store tool in a cool,
dry place in the provided case with the remote.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.

Service

• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
At either 3 years or 10,000 cycles, schedule a factory
service maintenance. Factory service includes general
inspections, replacement of tool's di-electric hydraulic oil
and testing of tool by trained technicians.
When the Factory Service Date is approaching or arrived,
contact Greenlee Customer Service. Expedited shipping
is available.
24
Action
Seek Service
Seek Service
Cool Tool
Cool Battery
Charge Battery
Seek Service
Seek Service
Charge Battery
Charge Battery
Seek Service
Seek Service
Seek Service
Re-insert Battery
Seek Service
Re-insert Battery
unit
®
Seek Service
[Not Used]
Seek Service
Seek Service
Warm Battery
Replace Battery
© 2023 Greenlee Tools, Inc.

Maintenance

• Maintain this tool according to these
procedures. Do not perform any maintenance
other than as described in this manual. Personal
injury or damage to the tool may result.
• Do not modify tool. Modifying the tool in any
manner may result in personal injury and damage
to the tool. A tool with a tool head that has been
welded, ground, drilled or modified in any manner
can break during use and throw parts that could
result in severe injury or death.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
Remove battery before performing any maintenance.
Severe injury can result from unexpected activation of
the tool.
Clean the housing with a damp cloth and mild detergent
after every use. Allow tool to dry completely before
replacing battery.
Do not attempt to open the tool. It contains no user-
serviceable parts.
Table 12: Repair Parts & Accessories
CAT #
BTC3-CK
BTC3GL REMOTE CONTROL, BHT CONTROL
BTC3-TJ
52177 BATTERY, 18V LI ION 2.0AH(PKG)
52178 CHARGER, BATTERY 120V (PKGD)
52179 CHARGER, BATTERY 230V (PKGD)
52180 CHARGER, BATTERY 12V (PKGD)
CP1
12274
EK425LXR
Description
BHT CONV KIT
HOT STICK ADAPTER
POUCH (PKGD)
CARRYING STRAP
300100034 REV 00