Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Service Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Greenlee GATOR EK410L
Summary of Contents for Greenlee GATOR EK410L
- Page 1 Serial Number GATOR EK410L ® Battery-powered Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com 52047663 REV 3 © 2012 Greenlee Textron Inc. 3/12...
-
Page 2: Table Of Contents
For recycling information, go to www.greenlee.com. All specifications are nominal and may change as design improve- ments occur. Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse of its products. GATOR is a registered trademark of Greenlee Textron Inc. -
Page 3: Important Safety Information
Failure to observe this warning could result in severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 4: Important Safety Information
Note: Keep all decals clean and legible, and replace • Use this tool for the manufacturer’s intended when necessary. purpose only. Failure to observe these precautions may result in injury or property damage. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 5: Identification
18 V, 1.5 Ah lithium-ion battery 52049202 230 VAC, 18 V charger 52049189 18 V, 3.0 Ah lithium-ion battery 52049204 12 VDC, 18 V charger Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 6: Operation
• If the tool is unable to reach the required crimp force, the red LED, work light, and an audible beep will pulse until after the trigger is released. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 7: Operation
Crimping Direction complete. SIDE A Failure to observe these warnings could result in severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 8: Die And Connector Selection
Crimps made on copper cable with Greenlee KC4-type dies and the copper connectors listed here are cUL and UL classified. Crimps made on copper or aluminum cable with Greenlee KA4-type dies and the aluminum connectors listed here are cUL and UL classified. -
Page 9: Maintenance
2. Check the oil level. grene, or death. Annually or After 10,000 Crimps 1. Replace the hydraulic oil. 2. Send the tool to a Greenlee Authorized Service Center for inspection. Do not use solvents or flammable Checking the Oil Level liquids to clean the tool body. -
Page 10: Troubleshooting
Dirt, contaminants, etc., in ram area Clean tool. of tool. Tool battery contacts damaged. Reform contacts. Tool components worn or Return tool to a Greenlee Authorized Service damaged. Center. Motor is inoperative. Low or uncharged battery. Try known charged battery. Inoperative battery may be discharged or may have reached life expectancy. - Page 11 EK410L Battery-powered Crimping Tool Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
- Page 12 4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070 USA Tel: 800-435-0786 Canada Tel: 800-435-0786 International Tel: +1-815-397-7070 An ISO 9001 Company • Fax: 800-451-2632 Fax: 800-524-2853 Fax: +1-815-397-9247 Greenlee Textron Inc. is a subsidiary of Textron Inc. www.greenlee.com...
Need help?
Do you have a question about the GATOR EK410L and is the answer not in the manual?
Questions and answers