These tools are protected by U.S. Patent No. 6,276,186, 6,401,515, 6,718,870, 7,086,979, and 7,254,982. All specifications are nominal and may change as design improvements occur. Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse of its products. KEEP THIS MANUAL Greenlee / A Textron Company 4455 Boeing Dr.
This tool is not insulated. When using this unit near energized electrical lines, use proper personal protective equipment. Failure to observe this warning could result in severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Failure to observe this precaution may result in injury and property damage. Note: Keep all decals clean and legible, and replace when necessary. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
1b. Bolt Cutter Head 6. LED Work Light (white) 2. Retract Button 7. Trigger 3. LED Indicator (red) 8. Cutting Blades (EBS12ML) 4. Battery Cartridge Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Recommended Operating Temperature Range ....5 °F to 122 °F (–15 °C to 50 °C) Battery Charger .........Read the instructions supplied with the battery charger 52068603 Charger, 10.8 V lithium-ion batteries, 110 V Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Failure to observe this precaution may result in injury and property damage. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Failure to observe these precautions may result in injury or property damage. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Pushing the retract button will result in the complete the battery retraction of the ram. Low battery Note (ES32ML only): For some cables more than one 20 sec cutting cycle may be required to complete the cut. If After Contact Greenlee...
3. Inspect the rotation of the head assembly. Fully result in serious eye injury from retract the ram. The head should rotate no more flying debris or hydraulic oil. than 350°. If damage is detected, contact Greenlee customer service at 800-435-0786 for warranty service or repair. After use: 1.
Air in hydraulic system. Pull trigger and hold retract button simultaneously. Run for approximately 10 seconds, and then attempt to cut. If unsuccessful, contact Greenlee customer service at 800-435-0786 for warranty service or repair. Cold oil. Pull trigger and hold retract button simultaneously to warm oil.
Page 12
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070 USA Tel: 800-435-0786 Canada Tel: 800-435-0786 International Tel: +1-815-397-7070 An ISO 9001 Company • Greenlee Textron Inc. is a subsidiary of Textron Inc. Fax: 800-451-2632 Fax: 800-524-2853 Fax: +1-815-397-9247 www.greenlee.com...
Need help?
Do you have a question about the ES32ML and is the answer not in the manual?
Questions and answers