Table of Contents
Advertisement
I-Press App
This tool has wireless capability that allows it to
communicate with the Greenlee i-Press App on your
smart device. If not already installed, the "i-press Klauke
Software Solutions" app is available through the App
Store or Google Play.
To connect to the app:
1. Open the app on your smart device and select the
"Greenlee" option.
2. Switch ON the wireless function on your smart
device.
3. Press and release the trigger to activate the tool to
establish a connection. Wait up to 20 sec. for the
model number to appear on the app. Repeat trigger
press if no option appears.
4. Choose the option on the screen for your tool based
on model number.
The app will allow you to create projects, change user
profiles, and review tool data (tool pressure readings,
battery charge, the last service date, etc.).
Further instructions how to use the i-press features are
within the app.
Remote tools in wireless mode and paired with a remote
will not connect with the app.
i—Press is a registered trademark of Gustav Klauke GmbH
App Store is a registered trademark of Apple Inc.
Google Play is a registered trademark of GOOGLE INC.
Training & Qualifications
This product is designed for use by professionals
trained for working on and around high voltage electrical
equipment. If you are not trained in the work methods
required for safe operation, do not use this product.
Always follow all training and proper live electricity
job site safety precautions outlined by your industry,
government, and employer. See also OSHA standard for
electric power generation, transmission and distribution
(29 CFR 1910.269) and NEC 70E: Standard for Electrical
Safety in the Workplace.
When required, such as for installation, removal
and repair of lines energized at more than 600V, it is
recommended at least a second trained and qualified
person is present at appropriate distance.
12
Pre-Operation Inspection
• Before use, inspect the tool and correct any
problems before using to reduce the risk of
injury and prevent product damage.
• Do not use hands to check for oil leaks. Oil under
pressure easily punctures skin. If injured, seek
medical attention immediately.
• If during inspection, damage to tool is observed
or suspected, do not use the tool. Large forces
are generated during use that can break or throw
parts and cause injury.
Remove battery before inspecting the tool head. Severe
injury can result from unexpected activation of the tool.
1. Clean any oil, grease or dirt from the tool body and
head, including handles and controls. A clean tool
aids inspection.
2. Inspect for wear and damage, such as cracks,
gouges, or chips in tool housing and head. Do
not use if any parts are worn, corroded, rusted, or
cracked.
3. Inspect the tool head for any cracks, gouges, or
chips or significant wear. Replace cutting heads with
dull or chipped blades before operating for a clean
cut. Do not sharpen blades, send in for service.
Replace crimping heads with any of the listed
imperfections to reduce the risk of the jaws breaking
and throwing parts.
4. Inspect for leaking hydraulic oil. Do not use if leak is
detected, send in for service.
5. Test the rotation of the head assembly, the head
should be free to rotate almost one full turn (about
330˚). If head rotates past a full turn, send in for
service. A loose head increases the risk of the head
separating from the body.
6. Inspect the hot stick adapter for damage and the
presence of the wing nut. Replace if adapter is
damaged or wing nut is missing.
7. Check for proper assembly and completeness, do
not use if there are missing or misaligned parts.
8. Check for the presence and condition of decals.
9. Inspect and maintain any other equipment being
used per its' instructions and is functioning properly.
If any issues are found, do not use this tool until
corrected.
© 2023 Greenlee Tools, Inc.
EK425LXR
300100034 REV 00
Advertisement
Table of Contents
